ASTMD495耐高压低电流电弧放电试验机
高电压降小直流电压检测仪(耐电孤检测仪)-(估算机把控好)
High voltage low current tester (arc resistance tester) - (computer control)
物料分类:耐电弧试验机
Product name: electric arc resistance tester
好产品具体型号:NDH-A
Product model: NDH - A
充分考虑标准:GB/T 1411-2002《粉状隔绝板材耐高降低电流值焊弧充放的现场实验》(相等IEC 61621-1997)及ASTM D495等基准的要设定生产的,并包含IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
最主要选用范围之内及作用:
本实验设计机是根据适用来三相电机、家居电气和家居家居电气等产业的电工作业用物料、硅橡胶胶胶和隔热电阻电阻漆等隔热电阻电阻物料的耐电孤耐热性评判,主用来固态物隔热电阻电阻物料如:物料、聚酰亚胺膜、硅橡胶胶、矿石、陶瓷制品、玻离、隔热电阻电阻油、隔热电阻电阻漆、瓦楞纸等物质的耐电孤耐热性测试英文;
本测试操作设计机由计算出机操控运动,需要表明特定测试操作工作状态及测试操作时长,测试操作结束之后并保留特定测试操作参数,并可打印机.要求实验室数据。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 该机为下集成设计,中下部为操作流程系统软件,上半部为实验室检测箱。
2 本產品按照*新自动化调控技艺,经过取舍子程序(IEC或ASTM)可半自动做校正,并在计算机上展现耐压期间和最终结果。
3 **使用性能稳定,抗干预业务能力强,测式gps精性强。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 脉冲通断时间间隔精度:需小于 ±10ms
2 调压器功率:2kVA
3 额定负载检验电流值:12.5kV
4 试验装置工作电压高精准度:±3%
5 瞬时电流控住高精准度:±10% 电流大小测试的精密度:1.5%
6 工业对制样心理压力:(0.5±0.05)N
7 电极物料物料:钨棒
8 电极材料距:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 利用周围环境温暖:(23±2)℃
10 运行氛围温湿度:(50±5)%
11 主机电源:220V±5% 50Hz
12 试验装置 措施: 国家标准/美标/10 mA 连继/20 mA 连续不断/30 mA维持/40 mA间断性
13 试验检测系统软件给出:
| 流程段 | 电弧放电直流电 mA | 电弧放电通断周期s | 各执行程序段坚持事件s | 试验台总日期s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 连续式通 | 60 | 240 | |
| 5 | 20 | 连着通 | 60 | 300 | |
| 6 | 30 | 陆续通 | 60 | 360 | |
| 7 | 40 | 连续性通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 项目编号 | 各称 | 的数量 | 备注名称 |
| 01 | 耐电孤公测仪 | 单台 | |
| 02 | 电极片系统 | 一整套 | |
| 03 | 电极片支架 | 1套 | |
| 04 | 外接电源拖链电缆 | 一个 | |
| 05 | 接地极放** | 1支 | |
| 06 | 瞬时电流毫安表 | 1台 | |
| 07 | 我的电脑测控APP | 一种 | |
| 08 | 坯料架 | 一只 | |
| 09 | 电极片路程条件块 | 2块 | |
| 10 | 方向角规则块 | 2块 | |
| 11 | 陶瓷制品片 | 2片 | |
| 12 | 喷墨彩打机 | 1台 | 品牌标志 |
| 13 | 计算公式机 | 1台 | 高端品牌 |
| 14 | 运行就维修手册 | 1份 | |
| 15 | 及格证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 的产品具体型号:
NDH-A 耐弧光试验检测仪-微机管控
NDH-B 耐脉冲经过多次实验发现仪-触模屏操控
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!