- 电压击穿试验仪
- 介电常数
- 电阻率测试仪
- 粉末电阻率测试仪
- 落球回弹试验仪,介电击穿强度测定仪:导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 落球回弹试验仪,介电击穿强度测定仪:电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
- 海绵泡沫材料检测仪器
- 受电弓/碳滑板检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
落球回弹试验仪,介电击穿强度测定仪:多功能压力测量系统
-
粉末自然堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:粉体综合物性测试仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动角测定仪
-
落球回弹试验仪,介电击穿强度测定仪:塑料表观密度测试仪
-
普通磨料堆积密度仪
-
白土堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动时间测定仪
-
落球回弹试验仪,介电击穿强度测定仪:压实密度粉末电阻率仪
-
陶粒砂体积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝松装密度测定仪
-
表面活性剂表观密度仪
-
自由流动堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高交流电压小电压校正仪(耐电弧焊接校正仪)-(估算机抑制)
High voltage low current tester (arc resistance tester) - (computer control)
產产品分类称:耐电弧试验机
Product name: electric arc resistance tester
食品尺寸:NDH-A
Product model: NDH - A
拥有条件:GB/T 1411-2002《固态物绝缘性村料耐高压得过低交流电电弧蓄电池放电蓄电池放电的试验台》(相等IEC 61621-1997)及ASTM D495等标准规范的请求设计构思打造的,并合乎IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
核心常用空间及用途:
本检测机是依据应用在三相电机、电嚣和小型电嚣等行业内的电工维修用朔胶管、不饱和树脂胶胶和隔绝层漆等隔绝层产品的耐脉冲特性参数评比,主应用在固态垃圾隔绝层产品如:朔胶管、胶片、不饱和树脂胶、白云母、淘瓷、玻璃钢、隔绝层油、隔绝层漆、厚纸板等物料的耐脉冲特性参数測試;
本测试机由核算机保持运动,能否出现现阶段科学科学检测英文阶段及科学科学检测英文时期,科学科学检测英文收场后并保留现阶段科学科学检测英文的数据,并可直接打印.规则科学试验汇报。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 该机为左右立体式设计,下端为基本网络协议,上面为试验装置箱。
2 本厂品主要包括*新智力操控技术性,采用取舍程序流程图(IEC或ASTM)可定时做出耐压试验,并在租赁上屏幕上显示试验装置的时候和最终。
3 **性能方面优秀,抗不干扰学习能力强,检查计算精性好。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 脉冲通断的时间出现偏差的原因:乘以 ±10ms
2 调压器储存量:2kVA
3 额定负载现场实验额定电压:12.5kV
4 应力测试输出功率精度等级:±3%
5 电压的控制精确:±10% 功率測量计算精度:1.5%
6 电极片对试件材料学习压力:(0.5±0.05)N
7 参比电极产品:钨棒
8 探针范围:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 用到条件在环境温度:(23±2)℃
10 便用工作环境温度:(50±5)%
11 24v电源:220V±5% 50Hz
12 冲击试验 工艺: 行业标准/美标/10 mA 间隔/20 mA 维持/30 mA不间断/40 mA连着
13 检测程序代码方式:
| 应用程序段 | 弧光直流电 mA | 脉冲通断时间段s | 各系统软件段延续日子s | 经过多次实验发现总期限s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 间断通 | 60 | 240 | |
| 5 | 20 | 累计通 | 60 | 300 | |
| 6 | 30 | 间断通 | 60 | 360 | |
| 7 | 40 | 不断通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 顺序号 | 明称 | 用量 | 自己的名字 |
| 01 | 耐弧光测试软件仪 | 一种 | |
| 02 | 工业装置 | 每套 | |
| 03 | 参比电极支承 | 一台 | |
| 04 | 电源开关线缆 | 1套 | |
| 05 | 保护接地放** | 一部 | |
| 06 | 直流电压毫安表 | 整台 | |
| 07 | 我的电脑测控app | 两套 | |
| 08 | 样品架 | 一枝 | |
| 09 | 参比电极高度标准规范块 | 2块 | |
| 10 | 立场标淮块 | 2块 | |
| 11 | 瓷砖片 | 2片 | |
| 12 | 喷墨复印机机 | 1台 | 公司 |
| 13 | 计算公式机 | 1台 | 产品品牌 |
| 14 | 在使用代表书 | 1份 | |
| 15 | 良好率证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 物品尺寸:
NDH-A 耐电孤耐压仪-微机调整
NDH-B 耐脉冲试验台仪-手触屏的控制
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!